The key to our success is “Good Products Good quality, Reasonable Price and Efficient Service” for Quality Inspection for UHF RFID Personnel Management System, We worth your inquiry, For more details, remember to get hold of us, we are going to reply you ASAP!
The key to our success is “Good Products Good quality, Reasonable Price and Efficient Service” for China RFID Gate Reader and UHF RFID Gate Reader, Our mission is to deliver consistently superior value to our customers and their clients. This commitment permeates everything we do, driving us to continuously develop and improve our products and solutions and the processes to fulfill your needs.
1. Integrated Impinj R2000 reading module.
2. Protocol: ISO18000-6B, ISO18000-6C(EPC C1G2).
3. Work Frequency: 865~868MHz, 902~928MHz frequency band(EU&US standard or customization).
4. FHSS or Fix Frequency transmission.
5. RF output power 30dbm in Max (adjustable).
6. Built-in 8dBi antenna with effect distance up to 10m.
7. Power supply: DC +9V-24V
8. Communication: RS232/RS485/Wiegand26/TCP/IP.
9. Size: 305*305*70mm.
10. Free SDK and demo software is provided.
PS: Effective distance depends on protocol, tag and environment.
Absolute Maximum Rating
ITEM |
SYMBOL |
VALUE |
UNIT |
Power Supply |
VCC |
16 |
V |
Operating Temp. |
TOPR |
-10~+60 |
℃ |
Storage Temp. |
TSTR |
-20~+75 |
℃ |
Electrical and Mechanical Specification
Under TA=25℃, VCC=+9V unless specified
ITEM |
SYMBOL |
MIN |
TYP |
MAX |
UNIT |
Power Supply |
VCC |
8 |
9 |
12 |
V |
Current Dissipation |
IC |
800 |
1500 |
mA |
|
Frequency |
FREQ |
902 |
902~928 |
928 |
MHz |
Size |
Size |
310×210×41 |
mm |
MECHANICAL DATA(UNIT mm)
INTERFACE
1. Power J1
No. |
Symbol |
Comment |
2 |
PWR |
+9VDC |
4 |
GND |
Ground |
1,3 |
NC |
Reserved |
2.WiFi Antenna J2 (SMA Female)
3. USB J3 (Slave)
4. USB J4 (Reserved)
5. CPIP RJ45 Socket J5
6. UART J6 (RS232 DB9 Female)
No. |
Symbol |
Comment |
1 |
NC |
Reserved |
2 |
TXD |
Data output in RS232 |
3 |
RXD |
Data input in RS232 |
4 |
NC |
Reserved |
5 |
GND |
Ground |
6 |
NC |
Reserved |
7 |
NC |
Reserved |
8 |
NC |
Reserved |
9 |
NC |
Reserved |
7. GPIO J7 (DB15 Female)
No. |
Symbol |
Comment |
1 |
Output1 |
General output1 |
2 |
Output2 |
General output2 |
3 |
Output3 |
General output3 |
4 |
Output4 |
General output4 |
5 |
Input1 |
General Intput1 with Internal 47k resistor pulled-down to ground |
6 |
Input2 |
General Intput2 with Internal 47k resistor pulled-down to ground |
7 |
Input3 |
General Intput3 with Internal 47k resistor pulled-down to ground |
8 |
Input4 |
General Intput4 with Internal 47k resistor pulled-down to ground |
9 |
TGIN |
Trigger input with internal 10k resistor pulled-up to +5V |
10 |
R+ |
R+ in RS485 |
11 |
R- |
R- in RS485 |
12 |
GND |
Ground |
13 |
NC |
Normal-Close terminal of internal relay |
14 |
NO |
Normal-Open terminal of internal relay |
15 |
CM |
Common terminal of internal relay |
8.TNC Antenna Port1~Port4 J8~J11
9. LED indicator
Symbol |
Comment |
POWER |
Power on indicator |
RUN |
Command-executing indicator |
TAG |
Tag-detected indicator |
WIRELESS |
WiFi active indicator |
ALARM |
Alarm indicator |
1~9 |
RSSI indicator |
The key to our success is “Good Products Good quality, Reasonable Price and Efficient Service” for Quality Inspection for UHF RFID Personnel Management System, We worth your inquiry, For more details, remember to get hold of us, we are going to reply you ASAP!
Quality Inspection for China RFID Gate Reader and UHF RFID Gate Reader, Our mission is to deliver consistently superior value to our customers and their clients. This commitment permeates everything we do, driving us to continuously develop and improve our products and solutions and the processes to fulfill your needs.